噴油崗位職責匯編(2篇)

更新時間：2024-05-18 查看人數：98

下載一鍵復制全文

目錄
1.噴油崗位職責是什么 2.噴油崗位職責要求 3.噴油崗位職責描述 4.噴油崗位職責有哪些內容 5.噴油崗位職責(2篇)

噴油崗位職責

崗位職責是什么

噴油崗位是制造業中的一種技術工種，主要負責在產品表面進行涂裝處理，通過噴油工藝提升產品的外觀質量和防護性能。

崗位職責要求

1. 熟練掌握噴油設備的操作，包括但不限于噴槍的使用、調壓技巧及設備維護。

2. 具備良好的色彩感知能力，能準確配色并確保涂裝效果的一致性。

3. 了解各種涂料的性質，能根據產品材質選擇合適的油漆種類和工藝參數。

4. 遵守安全生產規定，熟知危險化學品的處理和儲存方法。

5. 能夠按照生產圖紙和質量標準進行作業，保證產品的涂裝質量。

崗位職責描述

噴油工需要在潔凈的工作環境中，精確地將涂料噴灑在產品表面上。他們需要細心觀察產品，確保涂層均勻，無流掛、氣泡等質量問題。此外，他們還需關注生產效率，合理安排工作流程，以滿足批量生產的節奏。在面對復雜形狀或特殊材質的產品時，噴油工需要靈活調整噴涂角度和距離，確保每個角落都能得到適當?shù)母采w。

有哪些內容

1. 前期準備：檢查設備狀態，準備涂料，清潔產品表面，確保無塵、無油污。

2. 操作噴槍：控制噴槍的噴射壓力、流量和角度，確保涂層厚度適中，避免浪費。

3. 顏色匹配：根據產品設計或客戶要求，精確調配顏色，達到色彩一致。

4. 過程監控：在噴涂過程中不斷檢查涂層效果，及時調整工藝參數。

5. 干燥固化：控制好產品的晾干時間和溫度，確保涂層充分固化。

6. 質量檢驗：完成涂裝后，對產品進行嚴格的質量檢查，包括光澤度、附著力、耐磨性等。

7. 清潔與維護：清理噴槍和工作區域，保持設備良好運行狀態，預防故障發生。

8. 記錄與報告：記錄每天的工作進度、消耗材料及遇到的問題，向上級匯報。

噴油崗位是制造流程中的關鍵環節，其工作質量直接影響到產品的外觀質量和客戶滿意度。因此，噴油工需要具備扎實的技術基礎，高度的責任心，以及持續改進和學習的態度，以應對不斷提升的生產要求。

噴油崗位職責范文

第1篇噴油經理崗位職責

injector/ pump program manager 噴油嘴/油泵項目經理馬瑞利馬瑞利(中國)有限公司,馬瑞利,馬瑞利 responsibilities

1. be responsible of product profitability (product under development and on-going).

2. be responsible of product development budget assuring the observance of costs, e_penses and customer contribution.

3. manages product development resources inside own program area.

4. has the responsibility to prepare and implement the “initiative” for investment approval in case of new products.

5. in the acquisition order activity, gives support to commercial department (kam) in preparing and discussing the offer in front of customer.

6. sustains the proposal coming from manufacturing aiming improving quality performances.

7. guarantees the engagement with customers in terms of requirement, timing and deliverables.

8. through the project leader, manages the product development activities verifying milestones achievement and targets (timing, quality, cost).

9. controls the cost evolution and the e_tra cost in the launch phase paying attention to contribution margins, defining girc and efficiencies plans to achieve the e_pected profitability levels.

10. promotes actions to reduce cost on on-going products.

11. in the development phase, assures the link and the coordination between r&d, industrial, quality and sourcing.

12. other tasks assigned by the manager.

qualifications:

1. bachelor or above, major in mechanical engineering or relevant;

2. min. 7 years working e_periences, 3 years at managerial role, auto industry is preferred;

3. basic knowledge of fmea/spc/msa;

4. be familiar with apqp/ppap/iso/ts 16949, practical e_perience of program management;

5. good knowledge of cost control and profitability management;

6. good leadership in product & industrialization understanding;

7. good communication skill both in internal and e_ternal contact;

8. good pc skills especially for ms-office software;