- 目錄
第1篇 工程項目電氣監理工程師崗位職責
工程項目電氣監理工程師的崗位職責
(1)對總監理工程師負責,按合同文件要求負責電氣、設備、安裝等工程的監理工作 ;
(2)參與編寫項目監理規劃,負責編制本專業的監理實施細則;
(3)熟悉合同條款及規范、設計圖紙,在施工過程中對質量進度進行全面控制 , 對施工中出現的問題,按合同文件要求,提出處理意見;
(4)審查承包人提出的工程進度計劃和施工組織計劃,提出審查意見供總監理工程師審批時參考,并對計劃的執行情況進行檢查和監督;
(5)負責本專業分項工程驗收及隱蔽工程驗收,檢查電氣、設備工程的放樣及承包人對測量標志的保護措施;
(6)審查施工圖紙,必要時對需要糾正的地方提出處理意見并報總監理工程師審查;
(7)審查承包人提出的施工圖、竣工圖及變更設計圖,并報告總監理工程師,必要時轉報業主,以便作出變更設計的安排;
(8)審查承包人的分項工程施工方案,提出是否同意開工的意見,報總監理工程師審批,要經常深入工地,詳細檢查施工的各部位環節,批準或不批準承包人的檢驗申請,對承包人施工中存在的問題應建議總監理工程師簽發工作指令或監理通知單;
(9)審定工程計量、配合合同計量工程師審查承包人支付月報 ,經總監理工程師審核后上報業主;
(10)填寫監理日記并審 l 涌現場監理人員的監理日記;
(11)同合同計量工程師一起提出有關索賠、延期及變更問題的處理意見,并報總監理工程師;
(12)與道路工程師溝通,協調電氣、設備安裝與道路工程的施工,檢查預埋件的布置和埋設;
(13)辦理總監理工程師交辦的其它工作。
第2篇 項目電氣工程師崗位職責
電氣工程師(周口新項目) 鄭州萬科房地產有限公司 鄭州萬科房地產有限公司分支機構 職責描述:
1、負責電氣專業范圍內的方案工作,確保方案及進度達到整體進度要求,方案及設計質量符合國家規范、行業標準及企業內部標準;
2、協調電氣專業方案、設計與相關土建、水暖、市政、園林工程之間的關系,協調市政電的方案及報批報建工作,確保電氣工程達到設計與規范要求。
任職要求:
1、本科以上學歷,電氣管理相關專業;
2、有完整項目工作經驗;
3、熟悉國家及本地與本專業有關的規范要求;
4、具備較熟練現場處理、協調、溝通能力及技巧。
第3篇 項目電氣工程師工作崗位職責
(1)工作原則:有章可循,有法可依;
(2)崗位程序:寫你要做的,做你要寫的,記你所做的,查你做過的,改你做錯的,驗你改過的;
(3)負責本工程相應專業技術管理工作;
(4)審核設計文件,熟悉文件內容,實地核對,并根據施工調查資料對設計中存在的問題及時請監理或設計單位解決;
(5)編制施工組織設計,制定相應的安全、質量措施;
(6)匯總和提報工程材料及設備需用計劃,并協助物資部門解決定貨中的技術問題;
(7)處理各種施工問題,掌握工程進度,了解安全、質量情況;
(8)整理本專業的竣工資料,參與工程竣工驗交工作;
(9)參與推廣施工中運用新技術、新工藝、新材料工作;
(10)按時、規定提供有關報表,處理有關往來文件。
第4篇 工程項目電氣工程師崗位職責（二）
工程項目電氣工程師崗位職責(二)
(1)工作原則:有章可循,有法可依;
(2)崗位程序:寫你要做的,做你要寫的,記你所做的,查你做過的,改你做錯的,驗你改過的;
(3)負責本工程相應專業技術管理工作;
(4)審核設計文件,熟悉文件內容,實地核對,并根據施工調查資料對設計中存在的問題及時請監理或設計單位解決;
(5)編制施工組織設計,制定相應的安全、質量措施;
(6)匯總和提報工程材料及設備需用計劃,并協助物資部門解決定貨中的技術問題;
(7)處理各種施工問題,掌握工程進度,了解安全、質量情況;
(8)整理本專業的竣工資料,參與工程竣工驗交工作;
(9)參與推廣施工中運用新技術、新工藝、新材料工作;
(10)按時、規定提供有關報表,處理有關往來文件。
第5篇 項目電氣工程師崗位職責任職要求
項目電氣工程師崗位職責
電氣工程師-儲能項目 abb abb(中國)有限公司 1. technical contribution
_
evaluates， selects and applies standard techniques and procedures to perform engineering assignments.
_
provides rtu， plc based technical support for testing， installation and commissioning activities.
_
take leading and responsible for the project automation solution
_
provide on-site commissioning and troubleshooting of plc software as well as technical support of control system project to customer.
2. sales support
_
prepares project automation related documentation within one’s scope of deliverables.
_
assists in preparing proposal/presentation of engineering projects/programs (provision of bills of materials， estimated engineering hours， etc.).
3. contract management
_
supports contract managers in issuing claims (new/change in scope of work， cost impact， time impact， risk quantifications， etc.).
_
provides quality solutions as per customer requirement and delivers within budget and contract.
_
ensures adherence to safety standards and mitigates potential risks
4. planning and control
_
creates work plans and cost estimates in own area of responsibility
_
reviews and approves scope， budget and schedule for assignments and ensures quality deliverables on time and within targeted cost. improves effectiveness of work plan in collaboration with other functions
5. risk and opportunity management
_
creates and e_ecutes strategies for risk and opportunity management in one’s area of responsibility
_
identifies and manages contract risks taking preventive/corrective actions to resolve any contract/ quality/ program/ cost issues reports any outstanding issues to management， along with recommendations for resolution
6. customer
_
assists customers on technical issues， interacts with official contacts， contractors and other staff within his/her scope of deliverables.
_
assist communication pertaining to specific assignments or meetings
7. supply chain management
_
collaborates with the supply chain function to ensure that technical requirements for equipment or services are communicated and agreed on with potential suppliers
_
provides technical evaluation of supplier proposals and accepts as fit for purpose supplied equipment or services
8. processes and tools
_
uses standard processes and tools applicable to one’s area of responsibility.
_
ensures that engineering activities comply with required safety regulations and contractual requirements.
_
reports processes and tools inefficiencies and suggests improvements ideas.
9. people leadership and development
_
assigns tasks to and coordinates work with entry level engineers， technicians， administrative staff
requirement:
_
bachelor of engineering in electrical engineering (preferably in power systems);
_
minimum of 5 years of e_perience in the field of project e_ecution (plc， rtu， substation designer and or project engineer);
_
be familiar with industrial or power communication protocol; be able to make communication program and analysis the communication fault.
_
e_perienced of using hmi or scada.
_
capability of algorithm design. familiar with industrial algorithm， i.e. sample filter， data compression etc.
_
project e_ecution work e_perience for drives(vsd)， power conversion system， energy storage system， micro-grid and distributed generation etc. is a plus
_
field e_perience (asset);
_
availability to travel domestic and oversea;
_
knowledge of related engineering tools and software required to accomplish his task (autocad， office 365)
_
good communication， critical thinking and analytical skills;
_
must be precise， organized， fle_ible & autonomous;
_
result oriented， independent and fle_ible having the commitment to the business;
_
international culture awareness， ability to communicate and collaborate within global team and with international partners;
項目電氣工程師崗位
